Yellowed Xbox 360 Controller Restoration - Gaming Console Repair
Odd Tinkering
Restoring & repairing Xbox 360 controller that won't turn on and that is yellowed. I bought this controller as junk from Ebay.

I started the restoration with disassembly. The shell is closed with safety torx screws, which means normal torx bit won't fir them. To remove the trigger buttons I need to bend the plastic so I can't recommend that unless it is necessary, even though the plastic is very well bending. I also removed the sticker with isopropyl alcohol so I can reapply it once I'm finished.

After disassembly I cleaned the parts and put the yellowed plastic in the retrobrighting box I made on my other channel. Link to the video: I used hydrogen peroxide UV-light and heat to remove the yellowing from the plastic.

To open the battery pack I used some plastic tools, lots of force and patience. The pack is not meant to be opened but it can be done carefully without breaking anything. Once pack was opened I cleaned the battery contacts with isopropyl alcohol. Lastly the two halves were glued back together.

Thank you for watching my video!

The bellow links to amazon are affiliate links. I get a small fee of anything you buy after clicking them, but you pay no more than without clicking. This is a great way to support my channel.
Check out my Instagram:
Support me on Patreon:

Screw driver set with safety torx:
Plastic tool kit:
Hydrogen peroxide:
UV LED strip:
99.9% isopropyl alcohol (IPA):

Restoration playlist▶

Commenti: 2 352
Il prossimo